Terry's Computer Tips - computer tips articles and newsletters
Subscribe to my free
Terry's Computer Tips
email newsletter.
Your Name: E-mail Address:

Terry's Computer Tips Newsletter
May 2, 2010

Terry's Computer Tips Newsletter
http://www.terryscomputertips.com
A computer tips newsletter for users of PC's.

Volume 5, Number 47 — Sunday, May 2, 2010

IN THIS ON-LINE ISSUE:

   1.   Hardware Troubles Last Week — SOLVED!
   2.   The Lighter Side of Technology
   3.   Windows 7 64-bit vs Windows XP 32-bit Printer Sharing Problems
   4.   Getting a New Scanner for Windows 7
   5.   My Computer Security Software Recommendations

My emailed newsletter is sent weekly to individuals who have subscribed to it. While mainly an announcement of the latest online newsletter, it also has different, additional content — not the same articles that are in the online issue. Click here to subscribe. It's free!

Welcome to the on-line edition of my Terry's Computer Tips newsletter. Its articles are not in the email issue — and the email articles aren't in the online issue — subscribe to my email newsletter so you can read both.

 

1.  Hardware Troubles Last Week — SOLVED!

Last week, I wrote that I was having hardware problems on my notebook (my primary computer). They're solved for now, but I'm afraid that this one is at the motherboard level, and will only go away for good when I get a new notebook — it's happened on three different hard drives, so it's not the drive...

I wrote:

This is going to be a very short online newsletter this week, although the email newsletter is the normal size.

I'm having hardware problems with my notebook. For some reason, when I tried to reboot yesterday, the notebook responded that there was "No bootable partition in the table" or something to that effect.

Rebooting into Windows 7 on the notebook required that I put my Windows 7 DVD in the DVD drive. At that point, Windows 7 gave me a text-based menu screen. The options were to: Boot into the Windows 7 partition, press F8 for advanced options and boot from the DVD.

I picked Boot into the Windows 7 partition to make sure that worked. It did, just fine.

The only problem is that when I reboot, I get the same No bootable partition error. If I put the DVD in the drive, I get a Press Any Key to Boot From the DVD message. If I don't press any key, it boots my Windows 7 partiton. If I do press a key, the DVD boots and wants to install Windows 7.

In other words, I'm not getting the F8 for Advanced Options option. Of course, that's where I expect I need to be to solve this problem.

Right now, I've done an Acronis True Image Home 2010 backup of my C: drive to another computer on my network. I'm in the process of validating that backup (there's nothing worse than counting on the backup, and then finding that it was corrupted).

I think I know how to solve the problem.

Once I get my good, updated C: backup, I'm going to use the Disk Management tool (diskmgmt.msc) to set another partition as the Active partition (the one that's bootable), and then click Apply. Then, I'll promptly change that back to C:.

The idea is that Windows 7 will rewrite the hard drive's partition table so that my Windows 7 partition will boot.

That was exactly the solution.

Once my verification of the Acronis backup completed, I used the Start menu's Run command (if you didn't set up the Run command in your Windows 7 start menu, see my April 18th newsleter for detailed instructions).

I clicked on Run, then started the Disk Management utility by entering the following and clicking the OK button or pressing the Enter key.
  diskmgmt.msc

Since I had a D: partition set up, even though it was a partition that did not have an operating system installed on it I used the Disk Management utility to set the D: partition as Active. This had the effect of rewriting the hard drive's partition table. Then, I immediately changed it again to make C: the Active partition.

A quick reboot showed that this solved the problem. Yea!

Tech Tip
By the way, I finally realized that Acronis' validation process checks the internal consistency of the image file. It does not check back against the hard drive. You can keep working on your PC while the validation is occurring, but I already knew that.

In this particular case, I was validating to make sure the file was ok, so that I could immediately do the repair to Windows 7. I backed up across my home network — the 33 GB backup image took about an hour to make. The validation process across the network took almost six hours!.

For reading images stored on a computer across the network, Acronis' file reading process is apparently very inefficient. Today, I finally tried validating the exact same file by using the copy of Acronis True Image Home 2010 that's installed on that computer across my home network. It took only 18 minutes instead of 6 hours!

Validating a file on an external hard drive would be a little slower than one stored on the same computer, but should still be far less than the "across the network" validation time requirement.

 

Acronis True Image 2010

  
   Acronis True Image Home 2010

Make Your Own Restore DVD's and Restore Image files with your programs, your configurations and your data. Backup to DVD's, external hard drives, second hard drives or even other computers on your network. Restore entire drives or specific files and folders.

Have an earlier version? You can upgrade to ATIH 2010
 
 

2.  The Lighter Side of Technology

This week's Terry's Computer Tips technology cartoon from www.ineedacartoon.com .


 

 

3.  Windows 7 64-bit vs Windows XP 32-bit Printer Sharing Problems

Recently, subscriber Karen wrote to say that she was having troubles with Windows Vista 64-bit. She was working through them, but she wasn't happy.

I wrote back to Karen that if she upgrades to Windows 7 64 from Vista 64, I think she'll be a lot happier. I never ran Vista, but the reports and comments I've read say that Windows 7 is faster, more stable and less interfering that is Vista. I know I really like Windows 7, whether in 32-bit or 64-bit.

The only problems I've seen with Windows 7 versus XP were the typical driver issues, where a manufacturer didn't want to write a new driver, they wanted to sell a new scanner or new scanner software, or a new $15 PCI fax-modem (add-on, not one that came in a purchased computer system) — with one exception.

I don't know if this is a widespread issue or simply with Windows 7 64-bit to Windows XP 32-bit. My old HP Laserjet 1200 works fine with Windows XP 32-bit, including printer sharing with my notebook which run 32-bit Windows 7. It also works perfectly if i directly connect it to a WIndows 7 64-bit computer.

However, from a Windows 7 64-bit computer to the Windows XP 32-bit computer that's sharing the printer, Windows 7 can not download a printer driver from the XP 32-bit computer. In fact, it looks at the Windows XP 32-bit computer, but can't find the shared printer. Obviously it needs a 64-bit driver.

So, I directly connected to the printer and set up the printer in Windows 7 64-bit. Worked fine. But, when I moved the printer back to the Windows XP 32-bit computer, the Win7-64 computer still couldn't connect to the shared printer.

I wish Windows 7 would allow me to load the 64-bit driver in my 64-bit machine, and somehow recognize that the computer to which I'm trying to connect is sharing a printer via a 32-bit Windows system, and then automatically translate as necessary.

Again, I don't know if this is a Windows 7 problem or a Windows XP problem.

For now, my Windows 7 64-bit computers are printing via my HP Color Laserjet CP1518n. It's directly connected to my network, rather than being shared via another computer, so each computer can access and find it without any problem.

My solution for the Laserjet 1200 probably is to get a third-party network printserver to USB connector.

I asked Karen if she was having the same problem with Vista and shared printers on 32-bit computers? Karent wrote back to report:

Hi Terry
I am considering upgrading but its just not right. Instead of fixing Vista, to me it just seems they skipped right over it and created 7. I have been determined to make Vista work. I really think it’s the 64 bit that's messed up. I don’t really believe it was my av/firewall suite that messed it up, but of course its what Microsoft Certified techs tell me. MS even send me a cd/dvd of Vista64 Home Premium to reinstall rather than try to help me with my numerous problems. They'll give away the installation disks which has probably never happened before. Normally they just tell you to "recover" .
But I have friends with Vista 64 and no problems, however they hardly use their machines. Unlike me.

Anyway, I can't really address the question you asked because my sharing is set up differently. I am sharing my HP OJ5780 (which is connected via usb cable TO my Vista 64bit machine) with my husbands XP32bit laptop, my Vista32 bit laptop and several XP32 bit desktops with no problem (believe it or not). No problems sharing with any of those machines. This Vista64 is my "bill paying" machine and is hardwired to both the wireless router and the printer/scanner/fax.

If I got this right, you are saying a Laserjet hardwired to an XP32 bit machine cannot share TO a Windows 7 64bit machine? That the W7 64bit will not connect to the 32 bit driver? So physically installing a 64bit driver ON the W764 bit machine didn’t help? Needs to be a way to forcefeed the 64bit driver during the discovery process.

Am I understanding that correctly?

Many people have made the same observation — that Windows 7 seems like it should have been Vista Service Pack 3, instead of a new product. However, although it feels much like Vista, underneath the surface it's supposed to have a lot of changes for better operation. MS apparently felt that it was so significant that it was a new project.

Vista ended up being treated like Windows Millennium Edition — a short, vigorous retail life with a lot of consumer grumbles, then followed quickly (about 2 years) by a much more capable operating system. Windows XP followed Windows Me. Windows 7 followed Windows Vista.

I'm glad that I asked Karen if she was having similar printer sharing problems. Her solution sounded like it would be a great, low-cost fix to my printing issue.

I hooked a couple USB cables together (I've got a couple that came with special connectors that can do that, a female A connector on one side and a female B connector on the other) so it will stretch to my wife's Win7 64-bit desktop instead of my WinXP 32-bit desktop.

It would have been great for her to be able to print again on the black-and-white Laserjet, instead of always having to print on the color Laserjet.

Well, it is great. But, unfortunately, it didn't work for me. Hewlett-Packard does not make individual printer drivers available. It had combination "universal" packages for all of its printers, which I could install.

Alas, the PCL 6 and PCL 5 universal driver packages did not support my Laserjet 1200. There were .INF files that had information n a number of printers. I tried every one, but without any luck.

Karen's final message was:

I probably will go with W7 soon as I get tired of Vistas problems, but they are a challenge and I kinda like those. Dumb I know, but I don’t store my stuff on Vista so I've nothing to lose except time.. Want to let at least one service pack settle down before I buy it anyway. But I think that's scheduled for the fall of this year.

Hmm never heard of connecting two usb cables together. Over how many feet? If it works if might slow it down a bit but who cares? I did run an empty color cartridge in my printer to keep HP from yelling at me that there was no color cartridge in there. I didn’t have to set the B&W everytime because that's all there was; black. But a newer printer might not even print if there is no ink in the color cartridge. I rarely use color myself.

Would be interested to know if you run into problems setting it up that way.

Looking forward to Sunbelt's 64bit version firewall.
Thanks
karen

 

 

4.  Getting a New Scanner for Windows 7

One of the "joys" of updating or upgrading to a new operating system is replacing peripherals that don't work with the new OS. Some manufacturers routinely provide new drivers when new operating systems are released.

Other manufacturers, though, especially those providing relatively cheap peripherals will simply abandon the older models. While I was initially disappointed that the manufacturer of our flatbed scanner didn't provide a new driver for Windows 7 (or even Vista, which would probably have worked), we quickly realized that the scanner was over 6 years old and had cost barely over $100.

The most significant issue one we hadn't really realized — the lightbar in the scanner was fading and scan quality was deteriorating, although it never had beeen really great. It had also always had problems making black & white copies and grayscale. They were either light or blotchy, or if set to copy as a color document, the background had a blue/green cast.

The related software that we used has been Paperport. We'd upgraded over the years to Paperport 9, but that was 3 versions out of date. Needless to say, Paperport 9 didn't work with Windows 7, especially Windows 7 64-bit.

So, we started shopping. First stop were a couple local stores. One had a few brands that didn't interest us. The "big box store" did not stock any flatbed scanners, just multi-function printer/scanner models that sometimes included fax also. Their salesman's comment was "we've got them in our online store."

Next stop was to do some looking at NewEgg, which is where I buy most of my computer components. They've also got peripherals, cameras, GPS's and other electronics.

We ended up picking the Canon CanoScan 5600F from Amazon.
  Canon CanoScan 5600F Flatbed Scanner at NewEgg and
  Canon CS5600F at Amazon

Although the vendors do not indicate Windows 7, I did further checking in the user-comments at Amazon and NewEgg, as well as the Canon web site. We found that Canon's web site showed the "Compatible with Windows 7" logo, while the detailed specifications stopped at Vista.

Comments at Canon's site stated that it worked with Windows 7, as did comments at some other sites. Another comments we found said that the scanner worked fine with Windows 7 64-bit. Yet another comment said that the ArcSoft PhotoStudio software was not compatible with Windows 7, but that didn't bother us.

The tricks to the installation were:

  • Do not plug the scanner into the computer until after installing the software. The documents with the scanner warned about this, and even told you what to do if you didn't follow the directions.
  • and, REBOOT! The instructions did not tell us to do this. Until we rebooted, the scanner's driver (installed from the CDROM that came with the scanner) was not recognized by Windows 7. Fortunately, this didn't cause the problem that installing the scanner before installing the software would have caused.

Once we rebooted, Windows 7 automatically found the scanner, set it up, and we were ready to use it. Our first scan was a photograph. The scan was gorgeous.

We did not try to install the ArcSoft PhotoStudio software, which is photo-editing software. My wife uses Adobe Photoshop Elements for her photo editing. I use Ulead's PhotoImpact when I edit photos. Therefore, potential incompatibility with that software was not going to be a problem.

How did we like it? My wife loves her new scanner! She showed me an absolutely perfect replication of a scanned black-and-white laserjet image — I could not tell which was the original and which was the copy.

We still have to install PaperPort V12.0. I'd be happy with the standard software that came with the Scanner. However, we've used Paperport for years and have stored most scanned documents in its proprietary format. Paperport makes scanning, filing and document conversions extremely easy.

We'll probably covert those documents slowly to JPG and PDF files. But, maybe again, we won't. However, for now, we needed to be able to access them using Paperport.

 

 

5.  My Computer Security Software Recommendations

Acronis True Image 2010

I review my security software recommendations and update them for each weekly newsletter issue, if I think they need to change.

My Philosophy: Many people want to pick their most economical solution and prefer an all-in-one anti-virus, anti-spyware and firewall solution. In concept, that's a great idea. In actual practice, I don' think that this type of package is likely to be the best in all the protection categories you need.

Other people want to pick the best of each type program. I'm one of the these folks.

My choice of software that I am willing to recommend is driven by my search for software for me to use. I only recommend programs that I like and that I use. I will sometimes suggest alternatives to my recommendations, but I clearly note if I no longer use them.

Anti-Virus

I'm often asked about several other popular anti-virus or anti-virus combination packages. Yes, I realize that they are not in my recommendation list. "Enough said..."

From 2003 through mid-2008, my personal choice was ESET's small, fast NOD32 anti-virus program, which offers a FREE 30-day evaluation license. I still consider NOD32 to be one of the best in anti-virus protection — and it continues to get recognition and awards. Unlike some of its competitors, ESET offers multiple-year licenses also, and includes program updates in the multiple-year license.

Then, I changed from my long-time choices NOD32 (antivirus) and Sunbelt's CounterSpy (antispyware) to Sunbelt's VIPRE Antivirus + Antispyware.

I found that VIPRE puts even less load on my computer than the speedy combination of NOD32 and CounterSpy. I've also been impressed with the way its "deep scan" has found and eliminated risks that were stored in zip files, which is one of the latest malware email tricks. Sunbelt Software offers multi-year licenses and home site licenses on its software, both of which include program updates as well as signature updates. Sunbelt has recently released version 4 of VIPRE Antivirus (they dropped the "+ Antispyware" from the name, although the functions are there) and, more importantly, they released VIPRE Antivirus Premium, which integrates their new firewall software into the package. Sunbelt offers 30-day free trials of VIPRE Antivirus and VIPRE Antivirus Premium.

My anti-virus and anti-spyware choice for my computers and those of my family's computers is VIPRE Antivirus Premium

I'm often asked for alternatives to the programs that I recommend, especially by people who want to buy one package (a "suite") to do everything.

As a result, I tried a couple security suites in the last few months to pick a suite to recommend. ESET Smart Security 4 is my recommended suite alternative. Smart Security 4 has gotten great ratings and includes antivirus and antispyware, both from their current NOD32 v4 version, and antispam and firewall. I no longer use it and have returned to Sunbelt's VIPRE, but for a suite choice, that's what I would use.

Tech Tip
Many antivirus programs will offer you an anti-virus signature subscription renewal when your subscription renews. I strongly recommend against this option — buy the full program or make sure you get program updates with the subscription renewal. Both NOD32 and VIPRE purchases include both program updates/upgrades AND antivirus signature updates.

Vendors routinely improve the capabilities and speed of the programs, too. If you update only the signatures, you miss any program improvements.

Related articles:

Firewall Software

While the Windows XP firewall is much better than no firewall at all, but don't count on the Windows XP firewall to meet your needs.

You need a two-way firewall, which the Windows XP firewall is not!. Microsoft woke up and supplied a two-way firewall with Windows Vista. However, Microsoft built in pre-authorization for many programs. Windows 7's firewall is also two-way, and again has pre-cleared many programs to communicate outbound to the Internet — some to go where you want to go, and some to "call home."

The Windows XP firewall does not control outbound communications originating from your computer — and you should want to have control if adware/trojans/spyware or even commercial products want to talk to the Internet. Whether they are calling home or spewing spam, you want to be able to control your computer.

Do you want Windows Media Player to call home every time you play something? It does! Do you use the Search function in Windows Explorer to find things on your hard drive? Did you know that every time you search, Windows Explorer talks to Microsoft?

I didn't know that when I ran ZoneAlarm, but the Sunbelt Personal Firewall flagged that to me, and I can stop it or allow it to happen. Many other programs try to call home when you run them, too.

I'm using the firewall that's part of Sunbelt's VIPRE Antivirus Premium package. If you don't want to use the full package, then I recommend my previous choice for a firewall program, the Sunbelt Personal Firewall.

You can try the full-featured "paid version" of Sunbelt Personal Firewall free for 30 days — after that, you can register it or, if you're using it on a home non-business computer, you can let it revert to the free, lesser-function license.
Tip: Be sure to read my review of SPF for the settings I recommend.

At this time, the Sunbelt Personal Firewall works with Windows 2000, Windows XP and Windows Vista, in 32-bit versions only. I expect the new version of Sunbelt Personal Firewall to be available for 64-bit computers in April 2010, including Windows 7 support.

Sunbelt Personal Firewall is regularly $19.95 (with discounts for multiple computers and/or multiple years!) for a non-expiring license for the program and includes one year of their updates subscription. A unlimited Home Site License is $39.95 for a year.

Related articles:

Anti-Spyware / Anti-Adware Software

CounterSpy, from Sunbelt Software, has received many kudos from the computer press for its always-running and periodic full system scans. It has been my personal choice for my PC's and my family's PC's.

Sunbelt's CounterSpy v2.5, both improved CounterSpy's performance against malware and reduced its impact on system resources and responsiveness when its scanning.

Sunbelt continues to release updated program versions — the current version is v3.1 — and there's an even newer version about to be released. Nicely, Sunbelt do NOT install the updated programs automatically. You have to use the Update process in the program, which means that you'll know that something significant has changed.

I changed from my long-time programs NOD32 (antivirus) and CounterSpy (antispyware) to Sunbelt's VIPRE Antivirus + Antispyware.

I've found that VIPRE puts even less load on my computer than the speedy combination of NOD32 and CounterSpy. My computer seems to have much more pep and power than it had previously. I've also been impressed with the way its "deep scan" has found and eliminated risks that were stored in zip files, which is one of the latest malware email tricks.

Related articles:

Anti-spam Software

In today's Internet world, the question is not "if" you will get spam, but "how much will you get?"

I use and recommend POPFile as my first choice for handling spam. POPFile sits on your computer, between your email program and your ISP mailbox, and handles emial as it downloads.

POPFile uses a different approach to handle spam than some other programs do — it does nothing to reduce spam. It is designed as an email classification tool — you train it to recognize spam and any other type of email that you want to classify. These classifications can help you sort your emails into appropriate folders in your email program.

Sunbelt Software, who makes the anti-spyware program CounterSpy (which I use and recommend) and the firewall that I use and recommend (Sunbelt Personal Firewall) also has a well-regarded, award-winning anti-spam program called iHateSpam for Outlook and Outlook Express. Since I don't use Outlook or Outlook Express for email, I haven't tried iHateSpam.

Mailwasher Pro would be my first choice to handle spam before it ever gets into your computer's Inbox. Mailwasher Pro uses on-line Realtime Black Lists mail servers sending spam recently, "training" by you of what you think is spam, and your own "friends" and "blacklist" lists. Note: I found that PopFile generally meets my needs and stopped using Mailwasher Pro, even though PopFile works AFTER the emails have been downloaded. If I used a dialup connection, I would be more interested in Mailwasher Pro.

Mailwasher Pro can even bounce spam messages, as if your email address was not valid, although the usefulness and appropriateness of this is questionable. There is a free version called "Mailwasher," but it omits the functions that I consider critical for this purpose -- such as safely previewing the emails safely before they ever get to your email inbox.

Related articles:

Backup Software

When we think of security software, we usually think of antivirus, firewall, antispyware and antispam software. But, what other kind of software is security software? Backup software, of course.

We need to make backup copies of our important data. That data may be financial, such as your checkbook in Quicken, or your spreadsheet tracking your investmants. Or, it may be personal, non-financial data such as digital family photos.

What if your hard drive won't start one day? What will you lose? What if your computer is stolen (let's ignore, for now, whether you should encrypt data on your hard drive to protect it from others — let's just think about the inconvenience and loss to us!)?

There are two basic types of backups you should do.

You need to regularly back up your individual data files to another computer, to an external hard drive, or even to an online repository (but realize, if you have to rebuild the data on your computer, it may have to be downloaded for days and days). An external hard drive is the best choice if you don't have a home network where you could copy to another computer.

If you have a home network, use Karen's Replicator (free for personal, non-business use) to back up the files that change. I have it scheduled to copy my data files every evening from my notebook to another computer at my home. You should also get an external hard drive (or two, so you can alternate them) and make occasional backup copies to it. Preferably store it at a relative's house or your safe deposit box.

If you don't have a home network, get an external hard drive (or two, so you can alternate them) and make regularly scheduled backup copies to it. Use Karen's Replicator (free for personal, non-business use) to back up the files that change to your external drive. Preferably, store one external drive at a relative's house or your safe deposit box, so that if the worst happens, you haven't lost irreplaceable photos and other information.

The other type of backup is an image backup. This gives the ultimate in quick restore capability. Just plug in the external drive, boot the cdrom, and restore the image back to your hard drive. I use Acronis True Image Home 2010 (they also have discounts for upgrades)to make backups across my network every three days. Once a month, I make a full backup image. Every three days, it makes an incremental backup — copying only those files that have changed.

Acronis True Image Home, as of version 2009, allows you to recover individual files and folders from the image files, so you don't have to restore everything. The nice thing about making my backup across the network is that I can restore individual files across the network from those images. Sometimes that's the easiest thing to do, especially when the brain takes a little nap... <grin>

Why use both Replicator and Acronis True Image Home, if we can restore individual files from both? Replicator will always have the latest version it backed up — but not any earlier ones, and it can be run daily or even hourly without taking up much more drive space (backups are replaced when changed, rather than storing additional copies). With Acronis True Image, we can have multiple versions of the files to choose among. We can restore one that's months old, if we like, not just the latest version.

Cable/DSL Router

If you have a cable modem or a DSL modem, you need to have another layer of inexpensive protection between you and the Internet. A cable/DSL router isolates your computer from direct connection to the Internet. Your computer can easily request your email, web pages, etc. through the router. The responses come back to the router and are smoothly routed to your computer. But, someone on the Internet side of the router can not initiate a connection to your computer — they can only respond to your request.

Even if you only have one computer to connect to your cable or DSL modem, I recommend that you purchase and use a cable/DSL router because of the protection it can give you against attempts to attack through some flaws in Windows itself.

A router isolates your local network, whether it is only one computer or several, from the Internet by actually making it a separate network. The router gets the "public" IP address and handles all your outbound communications and the responses to them. But, it blocks computers on the Internet side from being able to initiate communications with your computer! This will prevent you from falling prey to many worms that try to attack security holes in Windows itself.

For a wireless router, I still recommend the Linksys WRT54G wireless router. Now that the "n" specifications have become final, I'm watching for the routers to be labelled as meeting the final specifications. Too much equipment still is labelled as meeting "Draft n" specifications, including the wireless card options in the new Dell Precision M6500 mobile workstation (notebook) that was released on December 1st! The interoperability issue still concerns me. I want the wireless equipment to work together without compatibility problems between manufacturers.

If you don't want wireless, I recommend the Linksys BEFSR41 wired router, which I also use. Either way, based on my experience, I recommend Linksys routers for price, reliability and Linksys' habit of releasing updated firmware for their products..

Tech Tip
By the way, the new "802.11n" wireless specification was approved in September 2009. It had been expected to be approved in January 2010.

If you're shopping, look for some indication that the model meets the final, approved standard. The "n" routers sold in the last couple years were based on different drafts of the standard.

I'm planning to switch from 802.11g to 802.11n, but not until January or February. I want the router manufacturers to have a chance to get their firmware upgrades done for 802.11n compliance, or to release new models in case they need to.

See these related articles:

 

Volume 5, Number 47 — Sunday, May 2, 2010

Copyright © 2010 Terry A. Stockdale.  All rights reserved.


 

Thank you for visiting my site — I hope you found the site and articles helpful. If you did, please consider supporting my efforts by making a purchase (if you have one to make) via one of the links in my articles, one of my recommendations, or in my "Ads by Terry" to purchase the item. You can also shop via these links to major Internet retailers
Amazon.com and NewEgg.com or this my Amazon store...